sensor-light.git
2018-03-24 Eugene CrosserReplace final picture master
2018-03-24 Eugene CrosserAdd picture of the finished device
2018-03-19 Eugene Crosserdisable pull up/down - PIR signal too weak
2018-02-26 Eugene Crosserexport missing gerber files
2018-02-23 Eugene CrosserChange the power connector type
2018-02-23 Eugene Crosserplay with BOM creation
2018-02-22 Eugene Crosserminor adjustment in traces and labels
2018-02-21 Eugene Crosserredraw board, with correct releif areas
2018-02-21 Eugene Crosserrebuild picture of the schematics
2018-02-21 Eugene Crossersome fiddling with thermal releif areas
2018-02-21 Eugene Crosserlayout adjustments
2018-02-20 Eugene Crosseradd capacitor to the regulator input
2018-02-20 Eugene Crosserthey are called geRber, right?
2018-02-20 Eugene Crossersave unsaved
2018-02-20 Eugene Crossertry adust layout
2018-02-19 Eugene CrosserAttempt at laying out the board
2018-02-19 Eugene Crossercorrect MOSFET pinout
2018-02-16 Eugene CrosserLED resistor values
2018-02-13 Eugene Crossersome attempt of pcb routing
2018-02-10 Eugene Crosserattempt to place components on the PCB
2018-01-06 Eugene Crosseradjust time to wait and light threshold
2018-01-05 Eugene Crosserstreamline logic, change light threshold
2018-01-03 Eugene Crosseradd notes about possible parts for the project
2018-01-03 Eugene Crosseradd resistors to the indicator LEDs
2018-01-02 Eugene Crossermake PWM duty cycle change more smoothly
2018-01-02 Eugene Crosserstreamline logic, adjust ambient light value
2018-01-02 Eugene Crossermake LED indication more meaningful
2018-01-01 Eugene Crossermention alternative MOSFET model
2018-01-01 Eugene Crosserforgot the pcb file
2018-01-01 Eugene Crosserfirst attempt to assign footprints and make a pcb
2018-01-01 Eugene Crosserremove extra line on the schematics
2018-01-01 Eugene Crosserremove experimental schematics
2018-01-01 Eugene Crosserchange lables on the schematic
2018-01-01 Eugene Crosserchange pin flags to make ERC happy
2018-01-01 Eugene CrosserFix typos in the README
2018-01-01 Eugene CrosserMake some electrical schematic with KiCad
2017-12-29 Eugene Crosseradd picture of the MOSFET
2017-12-14 Eugene Crosserfix README formatting
2017-12-14 Eugene Crosseradd some READMEs
2017-12-14 Eugene Crosseradd initial schematics
2017-12-13 Eugene Crosseruse zero duty cycle for zero
2017-12-13 Eugene Crosserfix loading in Makefile
2017-12-13 Eugene Crossermake PWM work on G2
2017-12-13 Eugene Crosseradjust makefile for G2
2017-12-13 Eugene Crosseradapt to msp430g2
2017-12-13 Eugene Crosserparametrize button interrupts per model
2017-12-13 Eugene Crosseruse model-dependent GPIO bits
2017-12-13 Eugene Crosseradd PINOUT file
2017-12-12 Eugene Crossertune up Makefile
2017-12-11 Eugene CrosserInitial Makefile
2017-12-11 Eugene Crosserformatting
2017-12-11 Eugene Crosserfix typos/loose defines
2017-12-10 Eugene CrosserAutomated reformat
2017-12-10 Eugene CrosserInitial msp430 program