make LED indication more meaningful
[sensor-light.git] / msp430 / main.c
index 8df6210c9836f6c8f835315b20666458322d8bfa..543022962a06b114721d3c7bb0cfadd34d40b06b 100644 (file)
@@ -30,6 +30,7 @@ int main(void)
        int Increment = 1;
        unsigned int Time_Count = 0;
        unsigned int Time_Left = 5;
+       unsigned int Time_Indicate = 2;
 
        WDTCTL = WDTPW | WDTHOLD;       // stop watchdog timer
        // Configure GPIO Out
@@ -107,13 +108,16 @@ int main(void)
                _enable_interrupts();
 
                // Button 2 or PIR events initiate light measurement
-               // and tuns on green led
+               // and tuns on green or red led
                if (events & (1<<ev_btn2|1<<ev_pir1|1<<ev_pir2)) {
+                       if (events & 1<<ev_pir1)
+                               P1OUT |= BIT_GL;        // Set green LED on
+                       if (events & 1<<ev_pir2)
+                               P1OUT |= BIT_RL;        // Set red LED on
                        if (Duty_Cycle > 0) {
                                Time_Left = TIME_ON;
                                continue;
                        }
-                       P1OUT |= BIT_GL;        // Set green LED on
                        // Sampling and conversion start
 #ifdef ADCENC
                        ADCCTL0 |= ADCENC | ADCSC;
@@ -125,7 +129,8 @@ int main(void)
                // End of light measurement. Set new Duty_Cycle,
                // zero increment and turn off green led
                if (events & 1<<ev_adc) {
-                       P1OUT &= ~BIT_GL;       // Clear green LED off
+                       P1OUT ^= (BIT_GL|BIT_RL); // Flip green and red LEDs
+                       Time_Indicate = 5;
                        if (Time_Left)
                                continue;
                        if (ADC_Result < LIGHT_THRESHOLD)
@@ -136,6 +141,8 @@ int main(void)
 
                // Button 1 sets non-zero increment (and toggles it)
                if (events & 1<<ev_btn1) {
+                       P1OUT |= (BIT_GL|BIT_RL); // Set green and red LEDs on
+                       Time_Indicate = 5;
                        if (Duty_Cycle > PWM_HALF) {
                                Time_Left = 0;
                                Increment = -1;
@@ -147,15 +154,18 @@ int main(void)
 
                // Timer event (100 ms) changed duty cycle and flashes red led
                if (events & 1<<ev_tmr) {
+                       if (Time_Indicate) {
+                               Time_Indicate--;
+                               if (!Time_Indicate)
+                                       P1OUT &= ~(BIT_RL|BIT_GL); // LEDs off
+                       }
                        if (Time_Count++ > 20) {
                                Time_Count = 0;
-                               P1OUT |= BIT_RL; // red LED on
                                if (Time_Left)
                                        Time_Left--;
                                else if (Duty_Cycle > 1)
                                        Increment = -1;
-                       } else if (Time_Count == 1)
-                               P1OUT &= ~BIT_RL; // red LED off
+                       }
                        if (Increment > 0) {
                                if (++Duty_Cycle >= PWM_ORDER) {
                                        Duty_Cycle = PWM_ORDER;
@@ -168,7 +178,10 @@ int main(void)
                                }
                        } else
                                continue;
-                       TA0CCR2 = 1 << Duty_Cycle;
+                       if (Duty_Cycle)
+                               TA0CCR2 = 1 << (Duty_Cycle - 1);
+                       else
+                               TA0CCR2 = 0;
                }
                __bis_SR_register(LPM0_bits | GIE);
                __no_operation();