X-Git-Url: http://www.average.org/gitweb/?p=pulsecounter.git;a=blobdiff_plain;f=Hal%2FHal.h;h=cee0483a3128f243d89bcac4a9a65f5337cc26ad;hp=f166774501274df29b6c8b7d1626b9afda905aae;hb=ca5bd37eed3f758a3ecbf24f482c403b69a0141f;hpb=a210dfa3087cdca2393e7a4f3611e654f4724b53

diff --git a/Hal/Hal.h b/Hal/Hal.h
index f166774..cee0483 100644
--- a/Hal/Hal.h
+++ b/Hal/Hal.h
@@ -4,7 +4,6 @@
  * This example HAL is intentionally simple.  The implementation is limited to:
  *
  * BUTTON -- a single button that when pressed will cause an interrupt.
- * CONNECTED_LED -- an LED that is controlled inside the HAL to indicate connection to a central.
  * DEBUG -- two debug GPIOs that are available as outputs from the EAP and under user control.
  * DELAY -- a delay routine that can delay by n milliseconds.
  * INIT -- set the hardware up to its initial state
@@ -27,6 +26,8 @@
 extern "C" {
 #endif
 
+extern int32_t buttonCnt;
+
 typedef void (*Hal_Handler)(void);
 
 /**
@@ -54,7 +55,6 @@ extern void Hal_buttonEnable(Hal_Handler handler);
  *
  * Called whenever the MCM peripheral connects to a central.
  *
- * Turns on the CONNECTED_LED to show connectivity to the central
  * Could do other things associated with connection to the central.
  *
  * Inputs:
@@ -63,9 +63,6 @@ extern void Hal_buttonEnable(Hal_Handler handler);
  * Returns:
  *   None
  *
- * Side Effects:
- *   CONNECTED_LED on.
- *
  **/
 extern void Hal_connected(void);
 /**
@@ -149,7 +146,6 @@ extern void Hal_delay(uint16_t msecs);
  *
  * Called whenever the MCM peripheral disconnects from a central.
  *
- * Turns off the CONNECTED_LED to show lack of connectivity to the central
  * Could do other things associated with connection to the central.
  *
  * Inputs:
@@ -158,9 +154,6 @@ extern void Hal_delay(uint16_t msecs);
  * Returns:
  *   None
  *
- * Side Effects:
- *   CONNECTED_LED off.
- *
  **/
 extern void Hal_disconnected(void);
 /**
@@ -226,7 +219,8 @@ extern void Hal_init(void);
  *   User LED off.
  *
  **/
-extern void Hal_ledOff(void);
+extern void Hal_greenLedOff(void);
+extern void Hal_redLedOff(void);
 /**
  * --------- Hal_ledOn ---------
  *
@@ -242,7 +236,8 @@ extern void Hal_ledOff(void);
  *   User LED on.
  *
  **/
-extern void Hal_ledOn(void);
+extern void Hal_greenLedOn(void);
+extern void Hal_redLedOn(void);
 /**
  * --------- Hal_ledRead ---------
  *
@@ -258,7 +253,8 @@ extern void Hal_ledOn(void);
  *   None
  *
  **/
-extern bool Hal_ledRead(void);
+extern bool Hal_greenLedRead(void);
+extern bool Hal_redLedRead(void);
 /**
  * --------- Hal_ledToggle ---------
  *
@@ -274,7 +270,8 @@ extern bool Hal_ledRead(void);
  *   User LED toggles state.
  *
  **/
-extern void Hal_ledToggle(void);
+extern void Hal_greenLedToggle(void);
+extern void Hal_redLedToggle(void);
 /**
  * --------- Hal_tickStart ---------
  *